Newark, OH & Beyond

Water Heater Repair Newark Ohio

Professional water heater repair in Newark Ohio. Get fast, reliable service from experienced technicians. Call now!

It’s a fact: hot water heaters are essential to modern living.

But when your water heater needs repair in Newark, Ohio, it can be an emergency situation.

Knowing the warning signs of a malfunctioning water heater and how to fix common problems can help you avoid further damage and costly repairs.

We’ll discuss the basics of water heater repair so that you can stay informed and prepared for emergencies. 

In the case you need plumbing professionals who can provide exceptional service, you can rely on Newark Water Heaters & Drains to help with your plumbing repairs.

Key Takeaways

  • Emergency water heater repair services are available 24/7 in Newark, Ohio.
  • Reputable plumbing services in Newark can provide time and cost estimates for water heater repair.
  • Certified technicians in Newark have access to special tools and parts for water heater repair.
  • Water leaks from the water heater can cause further damage and energy efficiency issues and should be repaired by a reputable company.
water heater repair newark

Emergency Water Heater Repair Newark

If you’re noticing any of these signs, it’s time to get your water heater looked at.

  • If the water temperature is inconsistent or too cold, there could be an issue with the electric water heater in Newark OH.

  • You may also experience strange noises from your tank-type Ohio water heater when operating.

  • In addition, if you find that your hot water runs out quickly during use or has a foul odor and taste, then getting professional plumbing help is recommended.

  • Leaks are another sign that your water heater needs repairing in order to avoid further damage to other parts of your home.

  • Lastly, if it has been over ten years since you had your unit replaced, then it may be time for a new one altogether.

Don’t wait until it’s too late; contact a local professional plumber for expert advice on getting any repairs or replacements done for your Newark OH water heaters today!

Common Water Heater Repair Problems

If you own a water heater, it’s important to be aware of the common repair problems you may experience. These include water leaks, anode rod replacement, and temperature control issues.

Water leaks are usually caused by faulty valves or a broken tank that needs to be replaced.

Anode rods should be inspected every few years for corrosion and replaced when necessary.

Temperature control can also cause issues if your thermostat is not functioning properly or the pilot light has gone out.

Water Leaks

If you’re experiencing water leaks from your water heater in Newark, Ohio, it’s time to get it serviced.

Water heater repair in Newark is not something that should be taken lightly as the leaking can lead to further damage and energy efficiency issues.

It’s important to contact a reputable company for repairs or installation of a new water heater in Licking County.

The technician will inspect the unit for any cracks or loose connections before determining what needs to be done.

If there are multiple parts that need replacing, the technician may suggest installing a new water heater instead as this could help improve energy efficiency and save on costs in the long run.

In either case, proper maintenance is key to ensuring your water heater runs efficiently and safely for years to come.

Anode Rod Replacement

Replacing the anode rod in your water heater is essential for maintaining its efficiency and preventing major damage. An anode rod attracts corrosive elements, extending the life of your water heater.

If you’re looking for a reliable and cost-effective water heater repair service in Newark, Ohio, there are several options available to you. The cheapest water heater repair in Newark will likely involve replacing the anode rod, as this is generally a quick and inexpensive fix.

However, it’s important to do some research so that you can find the best service provider who can offer quality work at a fair price. Make sure they have experienced technicians and use genuine manufacturer parts when performing repairs on your water heater.

Experienced professionals should be able to provide quick turnaround times with great customer service – all at an affordable price point.

Temperature Control

Now that you know how to replace your anode rod, it’s time to learn about the temperature control of your water heater. Temperature control is important for safety and efficiency reasons.

Here are a few tips on how you can adjust the settings of your heater:

  • Check your manual:

  • Refer to the installation instructions in order to understand the specific configurations and settings related to temperature control.

  • Familiarize yourself with any troubleshooting steps included in the manual.

  • Make adjustments as needed:

  • Use the thermostat knob or dial on the water heater itself in order to adjust its temperature setting.

  • If necessary, insulate pipes leading from and into your water heater to regulate temperatures more effectively.

Request Our Services

Get a free estimate and save your money!

Talk to an Expert

Leave a 5-Star

Frequently Asked Questions

The cost of water heater repair can be astronomical, but it all depends on the type of problem and how quickly you need it fixed. With careful planning and research, you can find an experienced technician who will get the job done right without breaking the bank.

When it comes to water heater repairs, warranties may be available depending on the provider. Many companies offer a variety of coverage options for parts and labor. Be sure to ask your technician about any potential warranty plans that could protect you from future costs.

Yes, many water heater repair services offer same-day service. It’s important to check with your local provider to make sure they are available for same-day repairs.

With its efficiency and durability, a tankless water heater is often the best choice for your home. Picture the endless hot showers you can enjoy without worrying about running out of hot water! Enjoy energy savings too with this compact, modern solution.

When buying a new water heater, look for higher energy efficiency ratings. Energy Star-rated models are an excellent choice as they use less energy and save you money on utility bills.

Comprehensive Services

Our team will go above and beyond just performing the service. We provide helpful knowledge to prevent future issues with your home plumbing.

Affordable Pricing

As a smaller independent plumbing contractor, we are able to provide a better than average service at a better that average cost.

Guaranteed Results

Newark Water Heaters & Drains has some of the best plumbing professionals at your disposal to carry out the task at hand.

Fast and Efficient

With many customers to help, we come prepared to deliver you a service that is performed properly and in a quick, timely manner.

A Plumber Near Me That Can Help You

Need emergency help? Call right away.

Thousands of organizations trust us
Richmond Water Heaters Logo
American Standard Plumbing Supplies Logo
Energy Star Logo
bradford white logo
water heater replacement newark oh
richmond water heater replacement newark ohio

How To Fix Water Not Getting Hot

If you’re having trouble with your water heater not getting hot enough, it could be related to a few common issues.

If you have an electric water heater, the issue might be related to resetting the thermostat.

For gas heaters, it may be a matter of relighting the pilot light.

In either case, understanding how to troubleshoot and fix these problems can help get your water back up and running.

Electric Water Heater Reset

Resetting an electric water heater in Newark, Ohio is relatively straightforward. If your water isn’t getting hot or you’re experiencing a range of other problems, resetting the heater can be done easily and quickly.

To begin, shut off power to the heater at the breaker box- make sure it’s off before proceeding with any work on the unit. Then locate the red button on top of the thermostat; this is typically found near the top of the tank. Press down firmly until you hear a click; this will reset your electrical system and should resolve many issues.

Be sure to test your hot water after performing this task; if it still isn’t working properly, contact a professional for help.

Light Gas Water Heater Pilot Light

to ensure the gas valve is on and the power switch is off. Follow these steps: concrete scanning antenna and utility locating antenna.

  • Locate the pilot light access panel. This will likely be located near the bottom of your water heater, and may have screws you’ll need to remove before accessing it. concrete scanning antenna and utility locating antenna.
  • Turn the knob to ‘pilot’, push in and hold down while lighting with a long match or lighter. You should see a steady blue flame once lit. concrete scanning antenna and utility locating antenna.
  • Turn the knob back to the ‘on’ position. Replace the access panel if applicable and make sure all safety measures are engaged before turning the power back on. concrete scanning antenna and utility locating antenna.

  • Once completed, your water heater should be up and running again!

    Let us take care of your plumbing needs.

    Whether you're looking for a simple repair or a complete plumbing system upgrade, we're here to help.